OMEGA FDT-30 Ultrasonic Flowmeter

OMEGA FDT-30 Series Transit-Time Ultrasonic Flow Meter

OMEGA FDT-30 Ultrasonic Flowmeter

The FDT-30 Series provides easy and low cost installation by clamping to the outside of existing piping systems. Non-invasive transit time system allows solids to pass through the pipe with no affect on the meter. Y-strainers or filtering devices are not needed. Greater accuracy can be attained in applications consisting of entrained gases.

The FDT-30 Series will automatically correct displayed flow rates and electronic outputs. Direct interface is provided to data collection systems via 4 to 20 mA output and either TTL-pulse or simulated turbine meter outputs that are proportional to fluid flow rate.

Designed to replace mechanical flowmeters in applications where liquid conditions tend to damage or impede mechanical flow meter operation. No maintenance is required. The FDT-30 Series can be used on applications such as well water and other liquids with moderate amounts of suspended solids or aeration. FDT-30 Series is housed in an enclosure suitable for outdoor mounting. Integral mount transducers are available for pipes 50 mm (2″) and smaller.

Specifications OMEGA FDT-30 Ultrasonic Flowmeter :

Liquid Types: Most clean liquids, or liquids containing moderate amounts of suspended solids
Power: 12 to 28 Vdc @ 0.25 A
Velocity: 0.03 to 12.4 MPS (0.1 to 40 FPS)
4 to 20 mA Output (Standard): 12-bit resolution; source power; 5V maximum insertion loss; 900 Ωmaximum loop impedance; can share ground common with power supply-isolated from piping system
Turbine Frequency Output (TTL Pulse): Switch selectable; non-ground referenced AC, ground referenced squarewave; 100 mV pp min/5 Vdc amplitude; 0 to 1 kHz range; 50% ±10% duty cycle
Display: 2 line x 8 character LCD alternates between rate and total in 10 second intervals
Top Row: 18 mm (0.7″), 7-segment
Bottom Row: 9 mm (0.35″), 14-segment
Rate: 8 digits maxTotalizer: 8 digits maximum; exponential multipliers from -1 to +6
Units: Feet, gallons, ft3, million-gal, barrels (liquid and oil), acre-feet, lbs, meters, m3, liters, million-liters, kg; rates programmable for per: sec, min, hr, or day
Operating Ambient: -40 to 85°C (-40 to 185°F)
Enclosure: NEMA 3 ABS, PVC and Ultem, brass or SS hardware
Dimensions: 75 W x 150 L x 63 mm D (3 x 6 x 2.5″)
Transducer Type: Clamp-on for pipe mount; time of flight ultrasonic
Accuracy: ±1% rdg @ rates > 0.3 MPS (1 FPS); ±0.003 MPS (0.01 FPS) @ rates < 0.3 MPS (1 FPS)Repeatability: ±0.5% rdg
Response Time: 0.3 to 30 sec, adjustable
Protection: Reverse polarity, surge suppression
Pipe Sizes: 12 to 50 mm (0.5 to 2″)
Pipe Materials: Carbon steel, stainless steel, copper and plastic

DOWNLOAD : OMEGA FTD-30 Series Transit-Time Ultrasonic Flow Meter

Info :

Kami berlokasi di Jakarta, Indonesia. Kami adalah Distributor-Agent-Pemasok/Supllier/Importir pengukur aliran (Flow Meter) yang dikelola secara profesional. Produk kami banyak digunakan di berbagai bidang, termasuk kelistrikan, industri kimia, minyak dan gas, tekstil, pemeliharaan air, perlindungan lingkungan, dll.

Selain impor dan memasok produk, kami juga menjual produk langsung ke konsumen. Konsumen kami bervariasi, mulai dari pedagang eceran, pedagang grosir, ataupun perusahaan besar, hingga instansi pemerintahan.

Kami menyediakan solusi pengukur aliran (Flow Meter) yang lengkap dengan berteknologi tinggi dan berkualitas tinggi dari berbagai brand.

Pelayanan Kalibrasi Flow Meter/ Water Meter :

Jasa Kalibrasi, Jasa Tera, Jasa Tera Ulang, Untuk Pengujian Flowmeter (Sertifikat Metrology) ;

Water Meter,
Oil Meter,
Gas Meter,
Listrik Meter &
Timbangan.

Rekomendasi Macam-macam Flow Meter :

Informasi Pemesanan OMEGA FDT-30 Ultrasonic Flowmeter :

Phone:
021 – 2913 – 5706
WA:
+62812 – 8836 – 5600
Email:
p722indonesia@gmail.com
Address:
Mega Glodok Kemayoran – Mall MGK Lantai UG – Blok D6 No. 3
Opening Hours:
Monday – Friday ; 09:00 am – 17:00 pm
Saturday – Sunday ; Closed