TOKICO FLOW METER TYPE FGBB631BDL-00X/02X DN20mm (3/4 inch)

TECHNICAL SPECIFICATIONS:

  • Model : FGB
  • Size : 20 mm
  • Model No. Direct-reading integrating type : FGBB631BAL-00X/02X
  • Accuracy : ±0.5%
  • Max. Working pressure : 10kgf/cm²
  • Hydraulic test pressure : 20kgf/cm²
  • Max. working temperature : 50°C for kerosene and light oil (100°C with the FGB type) & 100°C for heavy oil (120°C with the FGB-00X and FGB-02X types)
  • Flange rating : JIS 10kgf/cm²FF
  • Material Body : Cast iron (FC25)
  • Material rotor : FGB Type : Resin
  • Counter Unit : Integrating pointer and integrating counter ( a reset counter is also available)
  • Electrical Transmitter Unit
  • Transmitter : FGB Type : Reed Switch (S)
  • Power Supply : AC100V 50/60 Hz as standard
  • Number of Pulse : 0~5 PPS
  • Output signal : ON-OFF contact
  • Transmission cable : 2-wire cable with cabtype
  • Kerosene, Light Oil : 40~1,250
  • A heavy oil : 20~1,250

DOWNLOAD : Tokico CATALOG

 

SKU: 0203 Kategori:

TOKICO FLOW METER TYPE FGBB631BDL-00X/02X DN20mm (3/4 inch)

Tokico Flow Meter DN20 Type FGBB631BDL-00X/02X 3/4 Inch Inchare positive displacement type flow meter which are used in a wide variety of applications including measuring of boiler fuel oil and diesel oil, as well as for transactions for kerosene, light oil and heavy oil.

FGB Type

This flowmeter employs a gear-type rotor for small volume flow 0f low-viscosity oil in heat control applications, etc. It can be used without modification to measure kerosene, light oil or heavy oil. Measuring accuracy is ±0.5%.

Features Tokico Flow Meter DN20 Type FGBB631BDL-00X/02X 3/4 Inch :

  • Wide flow range and high accuracy

The accuracy of these flowmeters is within ±0.5% over a wide range of flow rates (max range of 1 : 150 for heavy oil)

  • Small pressure loss

Because the pressure loss of these meters is low, it is possible to perform accurate measuring at the suction side of a pump as well as accurate measurement of high viscosity fluids.

  • Compact Design

A positive displacement type flowmeter can be used at relatively high rotating speeds, making for compact design. In addition, the counter unit of these meters is compact yet easy-to-read, and construction is simple.

  • Excellent durability

The simple construction of these meters makes for longterm durability with virtually no degradation of accuracy

  • An electrical transmitter Unit attachable

A microswitch or a reed switch type transmitter unit having simple construction and high reliability is available.

 

TECHNICAL SPECIFICATIONS:

  • Model : FGB
  • Size : 20 mm
  • Model No. Direct-reading integrating type : FGBB631BAL-00X/02X
  • Accuracy : ±0.5%
  • Max. Working pressure : 10kgf/cm²
  • Hydraulic test pressure : 20kgf/cm²
  • Max. working temperature : 50°C for kerosene and light oil (100°C with the FGB type) & 100°C for heavy oil (120°C with the FGB-00X and FGB-02X types)
  • Flange rating : JIS 10kgf/cm²FF
  • Material Body : Cast iron (FC25)
  • Material rotor : FGB Type : Resin
  • Counter Unit : Integrating pointer and integrating counter ( a reset counter is also available)
  • Electrical Transmitter Unit
  • Transmitter : FGB Type : Reed Switch (S)
  • Power Supply : AC100V 50/60 Hz as standard
  • Number of Pulse : 0~5 PPS
  • Output signal : ON-OFF contact
  • Transmission cable : 2-wire cable with cabtype
  • Kerosene, Light Oil : 40~1,250
  • A heavy oil : 20~1,250

DOWNLOAD : Tokico CATALOG



Exclusive products

Special category of products
X
Need Help? Whatsapp Me..